KOMAISU Joystick Seal Repair Kit

KOMAISU Joystick Seal Repair kit

KOMAISU Joystick Seal repair kit is an accessory for repairing excavator joystick seals.
The joystick is an important part of mechanical equipment.
Its sealing performance has an important impact on the normal operation and service life of the equipment.
The joystick seal repair kit can effectively solve the problem of joystick seal failure.
The repair kit has the characteristics of easy installation, good sealing performance and wear resistance, and is widely used in various mechanical equipment.

How to adjust the clearance of the excavator handle
1、 Remove the handle clamp screws
If the gap between the excavator handles is too large, it needs to be achieved by adjusting the handle clamp screws. Firstly, it is necessary to loosen the handle clamp screws and remove the handle.
2、 Adjusting the gap
After removing the handle, you can see the rod clamp connecting the handle to the hydraulic valve. By adjusting the gap between the lever and the clamp, the adjustment of the handle gap can be achieved. The specific adjustment steps are as follows:
1. Use a wrench to loosen the rod clamp screw;
2. Gently pull the hydraulic rod clamp to narrow the gap between the rod clamp and the handle;
3. Insert the handle into the rod clamp and gently adjust its position to tightly fit the hydraulic rod clamp;
4. Use a wrench again to tighten the rod clamp screw and secure the handle.

KOMAISU Joystick Repair Kit

For Komaisu Cylinder Seal Kit

Seal repair kit KOMAISU